Is Your Gas Stove Clicking When Off? Fix It Safely in 2025
Your gas stove keeps clicking, even when it’s off. The sound is annoying, but worse, it can signal an internal issue that needs attention. Many homeowners hear it and ignore it, thinking it’s harmless. However, newer models rely on sensitive igniters and circuit boards that can malfunction if not properly maintained.
That small clicking can lead to bigger problems. It may point to moisture buildup, misaligned parts, or worn components. If left unchecked, it could damage your stove or even pose a safety risk.
According to a PBS NewsHour report, federal regulators are now reviewing new safety rules for gas stoves due to hazardous emissions, including those that occur when stoves are off. These concerns underscore the growing health risks and the importance of maintaining proper ventilation. These changes make it even more crucial to detect early signs of malfunction, such as clicking, before a more serious issue arises.
In this guide, we’ll walk you through simple, safe steps to fix the problem at home. You’ll learn what causes the clicking and what to check first before calling a technician.
Steps of My Gas Stove Clicking When Off
Gas stove clicking after it’s turned off isn’t just irritating. It often signals something out of place that needs your attention. Below are practical steps to help you identify the issue early and address it before it worsens.
Clean the Stove
Built-up grease or food around your burners can block gas flow and cause the igniter to keep clicking. This is one of the most common and easiest problems to fix. Before cleaning, always unplug the stove or switch it off at the breaker to avoid electrical shock. Start here to rule out surface-level issues before moving on to the burners.
Clean the Burner Heads, Caps, and Igniter
Use a soft brush or cotton swab to wipe around the burner heads and igniter. Rubbing alcohol or a baking soda paste works well for stuck-on grime. Avoid bleach or ammonia. Keep the igniter dry, since moisture may cause nonstop clicking. In 2025, GE Profile™ Series, Samsung NX58K9850SG, and Whirlpool WFG975H0HZ models, even a small amount of moisture around the igniter can cause sensitive electronics to malfunction, potentially leading to misfires.
Clean the Pilot and Burner Holes
Scrub around the burner holes with a toothbrush or wire brush. Use a pin to clear the small openings gently. Skip wooden tools like toothpicks, which can break inside. Light cleaning each month can help avoid future clicking.
Look for Moisture
Spills or boil-overs can leave moisture trapped near the igniter or under the burner caps. This hidden water can cause your gas stove to click nonstop, even when it’s off. Always disconnect power before cleaning. Wipe the surface dry and allow time for the igniter to air out fully.
You can speed up the process with a hairdryer on a cool setting. Avoid using the stove until everything is completely dry. Some homeowners mistakenly relight the burner too soon, which can damage the igniter or cause a short circuit in the module.
Inspect the Ignition Switch
Modern gas stoves use ignition switches to send power to the spark module. If moisture from spills or humidity gets into the switch, it can short out and send continuous voltage, causing the clicking sound.
Always unplug the stove first. Let the switch dry for several hours or overnight. If it still clicks, use a multimeter to test for damage. Some models allow replacing a single switch, while others require changing the full assembly.
Are the Ignition Switches Aligned Correctly?
Ignition switches are located behind the burner knobs and must be properly aligned with the valve stem. A misaligned switch can trigger continuous sparking. Remove the stovetop and check the placement if it is safe to do so.
Check the Spark Module
The spark module sends power to each burner’s igniter, helping the stove light properly. If the burners are clean and the ignition switches function properly, but the clicking persists, the spark module may be to blame. A faulty module can send signals even when the stove is off. Always shut off the power before replacing this part to prevent electrical hazards. Because 2025 spark modules can control multiple zones, a single fault can affect the entire cooktop.
Call a Technician
Cleaning may solve the issue, but some problems need expert care. A clicking sound that won’t stop could mean a faulty igniter, a damaged spark module, or loose wiring. These involve electrical components that are hazardous without proper training and supervision. Labour costs for gas stove repairs typically range from $50 to $100 per hour, with some companies charging more for the first hour.
Hiring a licensed technician ensures safe, accurate repairs. Refer to this gas stove repair cost guide for more information. Never ignore a gas smell or sparking. You can’t stop, shut off the gas line, and call a pro immediately.
Why Your Gas Stove Won’t Light and How to Troubleshoot It
Sometimes the problem goes beyond clicking. If your gas stove won’t light at all, it could be a sign of a deeper issue. Blocked burners, faulty igniters, or even loose connections may be the reason.
Knowing how to spot these signs early can help you avoid bigger repairs. For a complete breakdown of causes and easy solutions, check out our full guide on what to do when your gas stove won’t light.
Get Expert Gas Stove Repairs in Summerville, SC with 911 Service Today
Still hearing that clicking sound? 911 Service Today has the tools and experience to fix it safely and quickly. We help Summerville homeowners with reliable, same-day repairs that solve the problem without guesswork. Schedule your service now and keep your kitchen running smoothly.
